Topics:
This tutorial was made especially for you, who don't know or are having trouble changing the DNS on your LG Smart TV.
So don't worry, we're here to help!
See how to change the DNS!
On older Smart TV:
- First of all, turn on your Smart TV
- Then, with the remote control, press the menu button (Check in the image of step 1 below, which is the menu button on your remote control)
- Now, select the “Network connection” option, press “Start connection” and then “OK”
- Wait until it loads and the type of network your television is connected to appears. The options are: Wired Network = Connection via cable or Wireless Network = Connection via Wi-Fi
- Afterwards, select the option "List of other networks"
- Then, select the option "Manual configuration"
- Choose between the options: Wired = connection via cable or Wireless = connection via Wi-Fi (according to the type of network your television is connected to)
- The screen that will appear next is the one with the following title: “Connect to the network with an IP address in automatic mode”
- Walk with the directional arrows of the remote control down and go to the line of the “DNS” option
- Now select the “Manual” option to enter the new DNS number
- A box will appear for you to enter the following DNS number: 51.222.156.94 (it is important that you enter exactly the same DNS number, respecting punctuation)
- Afterwards, confirm by selecting the “OK” option
- Finally, wait until the new information is processed and finish by pressing “Done”
To better illustrate this tutorial, we have prepared the sequence of instructions above, in the form of images. Check it out:
On Newer Smart TV:
- To get started, turn on your television.
- Then, press the menu button (Check the image in step 1 below which is the correct button)
- Now, with the directional arrows on the remote control, go to the option "All settings" (this option is the last one in the column that will appear on your right side)
- Then go to the “Network” option
- Choose between the options: Wired connection (Ethernet) = Cable connection or Wi-Fi network connection, according to the type of network your television is connected to
- Walk with the directional arrows on the remote control until you reach “Edit”
- Afterwards, uncheck the option "Define automatically"
- Afterwards, go to the line for the “DNS” option to enter the new number and, in the blank spaces, enter the following DNS number: 3.222.170.109 (it is important that you enter exactly the same DNS number, respecting the punctuation )
- Finally, confirm in “Connect”.
Follow the step by step also with images:
